Mon. Sep 16th, 2019

3 Brake Problems That You Shouldn’t Avoid

3 min read

For safe driving, it’s imperative for you to take good care of brakes as well. Here’re a few brake problems you should look out for.

You must be having one of the best quality premium tires. But if the brakes are not in good condition, it’ll be really difficult for you to drive without getting stranded in any mishap. Since brakes play a significant role in keeping you safe on the road, it’s imperative for you to keep them in tiptop shape to get the most out of it.

Perhaps that’s the reason why you should be aware of all the warning signs and what should be your next step when you spot the problem. Here’re a few major brake problems that can be really dangerous on the road. So let’s dive in;

Check for Wear

It mainly has to do with the brake discs. These are designed to be robust, but obviously, they also wear down over time. In case the brake discs wear too much, they may be unsafe. Every time you press the brake pedal, the weight is transferred to the front wheels. So whether to slow down or stop the vehicle, front brakes have to do the majority of the work.

It’s imperative to conduct a check of front discs and pads to see whether they should be replaced or not. Manufacturers have defined a minimum thickness for discs. Once it reaches that point, it has to be changed along with pads obviously. Make sure you replace the discs in a pair.

Are They Corroded?

While front brakes need to be replaced due to wear, the counterparts also need renewing as they’re corroded. Since the brake discs are made from cast iron, it gets rusted easily. As rust starts developing, it’s cleaned off as the pads keep pressing on them. But since the rear brakes do very little work, the rust on them isn’t cleaned that frequently.

Therefore, it’s common for discs to corrode on small & light vehicles. As it gets worse, it leads to the surface pitting thereby causing the discs to be seriously weakened. So make sure you get these parts of your braking system checked for corrosion. If they get corroded too much, it’s time to replace them.

Water in Brake Fluid

Irrespective of the number of miles you drive, the brake fluid will absorb water from the atmosphere over time. In case the brakes start getting hotter, they will cause this moisture to boil and eventually evaporate. Consequently, the vapors will compress thereby making your brakes feel ‘spongy’ when you press the pedal. Due to which, you will lose the ability to stop and even slow down effectively.

Besides, the moisture within brake fluid will lead to the corrosion of brake calipers or wheel cylinders resulting in leakage. In case any of these two scenarios occur, it’ll definitely turn up extremely dangerous.  Since there’re so many potentially serious problems involved in it, that’s the reason why it’s recommended for you to get the brake fluid replaced every couple of years. No matter if you buy the best quality premium SUV tyre in Dubai, driving would still be unsafe if the brakes are not well.

Leave a Reply

Your email address will not be published. Required fields are marked *